Wire yellow 2.5mm 1m aluminum wire modeling wire craft wire

15.00 dh
by Tigue Tague
Type: Wire and ribbons
Yellow aluminum wire, 2.5mm thick, 1 meter long.

This aluminum wire is 2.5mm thick. We bend the wire around with a circumference of 20.5 cm. You can also find end caps in our shop to glue them to the ends of the wire.
Aluminum wire is generally very easy to bend because it is very soft. You can bend shapes, ear hooks, words and bracelets out of it. The thinner the wire, the more filigree you can bend it, but the thinner it is, the faster it will bend again. We recommend hardening the wire with a soft hammer, eg nylon.
It is also interesting to cover the colorful wires with hollow rubber tubes. You can find suitable rubber tubes in our shop. The inner diameter of the rubber tubes should always be slightly larger than the wire, as it is a little difficult to pull up the longer wire. A short piece of 3mm wire can easily be obtained with a 5mm (hole 3mm) rubber tube. It gets exciting if you punch holes and patterns in the rubber tube beforehand, then you can see the colored wire through the holes.

A little tip:you can harden aluminum a bit by beating it with a soft hammer.

Thickness:2.5mm
Length:1 meter
Color yellow
Material:aluminum